Kikusui KHA3000, Operation Manual, Page: 328 / 392

328
KHA3000
Querying Measurement Data
FETC:CURR:HARM:PHAS
READ:CURR:HARM:PHAS
MEAS:CURR:HARM:PHAS
Each queries the phase angle of harmonic current.
Command
FETCh[<channel#>][:SCALar]:CURRent:HARMonics:PHASe?
{ALL|<NRf>}
READ[<channel#>][:SCALar]:CURRent:HARMonics:PHASe?
{ALL|<NRf>}
MEASure[<channel#>][:SCALar]:CURRent:HARMonics:PHASe?
{ALL|<NRf>}
Parameter Value: 1 to 40 (harmonic measurement mode)
1 to 180 (FFT analyzer)
“ALL” queries data of all orders.
Response
Returns the phase angle of <NRf>th-order harmonic current in the <NR3> format for
FETC:CURR:HARM:PHAS? <NRf>, READ:CURR:HARM:PHAS? <NRf> and
MEAS:CURR:HARM:PHAS? <NRf>.
Returns the phase angles of harmonic current of all orders in the <NR3>, <NR3> ... format
for FETC:CURR:HARM:PHAS? ALL, READ:CURR:HARM:PHAS? ALL and
MEAS:CURR:HARM:PHAS? <ALL>.
Unit:
DEG
Querying a Momentary Flicker Value
FETC:FLIC:ST
READ:FLIC:ST
MEAS:FLIC:ST
Each queries a momentary flicker value.
Command
FETCh[<channel#>][:SCALar]:FLICker:ST?
READ[<channel#>][:SCALar]:FLICker:ST?
MEASure[<channel#>][:SCALar]:FLICker:ST?
Response
Returns the momentary flicker value in the <NR3> format.
Unit:
None