Kikusui KHA3000, Operation Manual, Page: 323 / 392

13
KHA3000
323
Test Execution (Trigger Function)
Rem
ote Contr
ol
Aborting Measurement
ABOR
Stops measurement.
The trigger state immediately after power-on of this product is the same as that when the
ABOR command is sent.
If the ABOR command is sent when measurement has already begun, measurement data
remains invalid.
Measurement data is not invalidated if the ABOR command is sent when the INIT command
has not been sent and the retained measurement data is valid.
The ABOR command cannot specify a sequence group. ALL is always assumed.
Command
ABORt[:ALL]
Judgment
JUDG:RES
Queries the general judgment result of the test that was finished previously.
Command
JUDGe;RESult?
Response
Returns the general judgment result of the test that was finished previously in the
<character> format, that is, returns PASS, FAIL, WARN or ABORT. An error is returned if the
previous test result is not retained.