Kikusui KHA3000, Operation Manual, Page: 268 / 392

268
KHA3000
Loading and Saving Files

Procedures for inputting a character (F1 key) and deleting a character (F2
key)
1
Press the F3 (Rename) key.
The Rename dialog will be presented.
2
Use the small knob, large knob or arrow keys to select a character.
3
Press the F1 (Input 1-char) key.
The character selected will be added to the part where the cursor is blinking (Input 1-
char). To delete a character, press the F2 (Delete 1-char) key. To change the character
type, press the F3 (Change char type) key to select the type. To repeat adding or
deleting characters, return to the above step 2.
4
Press the ENTER key.
The characters entered will be fixed and saved.
Loading a Test Condition File
The procedure to load a test condition file is described below. The same procedure can be
used when a test result file is to be loaded. If only the Current Input Terminal and Scaling
setting information is to be loaded, press the F6 key at Step 1. On and after Step 2, the
procedure is identical to the case test condition files are loaded.
14 Select Folder Select a folder that contains test condition files (HASET or ) from
the folders for the test mode being used. Each time the F1 key is
pressed, the selected folder is boxed. The value shown in the menu
selection field is the folder number (the number of the top folder is
1). Press the ENTER key to complete the entry. –
15 Select File Select a test condition file in the test condition folder (HASET or )
selected in the Select Folder menu. This test condition file contains
only the information on the Current Input Terminal settings and
Scaling settings. Each time the F2 key is pressed, the background
color of the selected file is reversed. The value shown in the menu
selection field is the file number (the number of the top file is 1).
Press the ENTER key to complete the entry. –
16 Return to Top Menu Returns to the top menu of File Operation. –
17 Format Formats the storage media. –
F key: Function key. You can also use the ESC key to return.