Kikusui KHA3000, Operation Manual, Page: 264 / 392

264
KHA3000
In-rush Current Measurement
Reset Trigger is canceled and triggers are inhibited. The screen keeps displaying the
present waveform. The F3 key menu changes to Reset TRG. To enable triggers again,
perform Step 3 of
“ Setting the current trigger level. ”
Voltage Range, Current Range and Wiring Method
The In-rush Current Measurement submenu 2/3 is identical to the Basic Measurement
submenu 2/3.
Scaling, Current input Terminal
The In-rush Current Measurement submenu 2/3 is identical to the Basic Measurement
submenu 2/3.
LPF and AC Coupling
No. Menu item Description Default
1 LPF Select the cut-off frequency of the anti-aliasing filter. Select "Bypass" is
no filter is used. If it is the first time to enter the In-rush Current
Measurement submenu, "Bypass" has been selected. Bypass
2 AC Coupling Select the input coupling mode for voltage and current measurements.
DC is for DC coupling and AC is for AC coupling. If it is the first time to
enter the In-rush Current Measurement submenu, "DC" has been
selected. DC
3 Return to Top Menu Returns to the top menu of Other Measurement. –
4
Prev/Next Page 3/3
Switches to another sub-menu page. –
F key: Function key. You can also use the ESC key to return.
F1 LPF
6 kHz
15 kHz
Bypass
F2
AC Coupling
DC
AC
F5
Return to Top Menu
F6
Prev/Next
Page 3/3
In-rush Current Measurement sub-menu 3/3
1
3
2
4