Kikusui KHA3000, Operation Manual, Page: 248 / 392

248
KHA3000
Displaying the Other Measurement Display
The “ Other Measurement display ” has three measurement items, which observe and analyze
signals. Judgment, saving and report printing are not possible. Waveforms are saved to the
storage media as external memory by pressing the HARD COPY key.
• Basic measurement
• FFT analyzer
• In-rush current measurement
1
Press the OTHER key.
The OTHER key LED illuminates and the Measurement Item Selection display appears
with a dialog box. If the screen does not switch to this display, perform the following
procedure.
If the display does not appear by pressing the OTHER key
A dialog box “ Can ’ t execute during test/analysis. Please operate it after ending ” is displayed
and the display switches to the test ending menu.
2
Press the F3 key (Exit) in the test ending menu.
The test ends. The test status display on the screen switches from “ Analysis ” to “ Set. ” If
the test results have not been saved with the F1 key (Save), a dialog box and a menu
for saving operation appear. To save the test results, select F1 (Yes); otherwise, select
F2 (No).
3
Press the OTHER key.
The OTHER key LED illuminates and the Measurement Item Selection display appears
with a dialog box.