Kikusui KHA3000, Operation Manual, Page: 204 / 392

204
KHA3000
Controlling the AC Power Supply
Voltage and Frequency Setting and On Phase
No. Menu item Description Default
1 OUTPUT Turns on and off the output of the AC power supply. In the ON state, the
lamp icon in the upper part of the screen lights up. OFF
2 Voltage Setting Input the output voltage of the AC power supply. The input range is 0.0 V
to 304.8 V. The output voltage must be within the Voltage Range (F4) and
conform to the rated power of the EUT. The set value of the output voltage
varies in type depending on the wiring method. The phase voltage is used
for 1P2W, 1P3W and 3P4W and the line voltage is used for 3P3W. (The
menus for setting the wiring method are described in the chapters for the
harmonic test, voltage fluctuation test and other tests.)
Enter the value with the numeric keypad and press the ENTER key, or
use the large knob to increase or decrease the value. –
3 Freq Setting Select the output frequency of the AC power supply. Select it
conforming to the rated power of the EUT. 50 Hz
4 Voltage Range Select the output voltage range of the AC power supply.
Select the 100 V range for the output voltage setting range 0 V to 152.5 V.
Select the 200 V range for the output voltage setting range 0 V to 304.8 V. 100 V
5 On Phase The voltage phase angle when the output of the AC power is turned on
can be specified. In this menu item, select a specification method.
When
“ Free ” is selected, the voltage phase is not specified. When
“ Specified ” is selected, enter a value in the F2 menu item, Phase Angle.
Free
6 Phase Angle Enter a value of the phase angle when “ Specified ” is selected in the F1
menu item.
The input range is 0° to 360°.
Enter the value with the numeric keypad and press the ENTER key, or
use the large knob to increase or decrease the value.
0
7 Return Terminates the selection of On Phase. –
8 Return Terminates the specification of AC Power Supply Control. –
9 Alarm Clear Clears the alarm of the AC power supply. –
10 AC Pow Source Model Select Don’t use or Use . Don ’ t use.
F key: Function key. You can also use the ESC key to return.
F1
AC Power Supply Cont
Sub Menu
F1 OUTPUT
OFF
ON
F2
Voltage Setting
(Input numeric value)
F3
Freq Setting
50 Hz
60 Hz
F4
Voltage Range
100 V
200 V
F5
F1
On Phase
Free
Specified
F2
Phase Angle
(Input numeric value)
F6
Return
F6
Return
F3
Alarm Clear
F4
AC Pow Source Model
Don’t use
Use
On Phase Select
Æ
Sub Menu
1
3
2
4
5
6
7
8
9
10
Menu 1/1