Kikusui KHA3000, Operation Manual, Page: 118 / 392

118
KHA3000
Controlling the AC Power Supply
The AC power sources that this product can directly control are PCR-LE and PCR-LA
1
. PCR-
WE is controlled by the separately sold application software SD006-KHA Harmonics
Analyzing Suite.
Setting the AC Power Supply
To establish communication with the AC Power Supply, set the communication parameters
from the AC power supply panel as shown below.
Showing the External Control Display
� Press the EXT CONT key.
The External Control display appears.
1. PCR-LA with firmware version 3.32 or 3.33 cannot be used.
PCR-LE PCR-LA
A shaded area indicates
a set value.
Baudrate: 9600 bps/ 19200 bps/ 38400 bps
Data: 8 bits / 7 bits
Stop: 1 bit / 2 bits
Parity: None (fix)
Flow Ctrl: OFF / RTS
･
CTS
0 8 1 1
A shaded area indicates
a set value.
Baud rate 1: 9 600 bps 2: 19200 bps
Data length 7: 7 bits 8: 8 bits
Parity 0: None 1: Odd 2: Even
number number
Stop bit 1: 1 bit 2: 2 bits
WARNING
• To prevent an electric shock, do not touch the SOURCE and LOAD terminals of this
product.
• Do not touch the OUTPUT terminal of the AC Power Supply.
• Do not touch the INPUT and OUTPUT terminals of the Line Impedance Network.