Kikusui KHA1000, Operation Manual, Page: 45 / 274

KHA1000
2-15
2
In
sta
lla
tio
n
a
n
d
P
re
p
ara
tio
n
fo
r U
se
Fig.2-8 System connection
2.5.2 Connecting the Ethernet Port
xviii ,
Page 4-14
This is an optional function for connection to a network printer. It is a factory
option. When the optional function is installed, the Ethernet port is mounted on the
rear side. Connect to the network using a Category 5 LAN cable or higher (RJ-45).
To connect to the network via the hub, use a straight cable. To connect directly to the
printer, use a cross cable.
For details on setting Ethernet communication conditions, see Section 4.4.2
"Setting the Date/Time, TCP/IP (Network Protocol) and Printer".
2.5.3 External Signal Input Terminal (EXT INPUT)
This terminal has no function. It is equipped for function expansion.
INPUT
OUTPUT
Control signal
Control signal
Cable for
control signal
LAN cable
(when optional Ethernet port is installed)
EUT
Line Impedance Network
G N L
G N L
AC Power Supply
G N L
G N L
G N L
Power cord with plug
Harmonic/flicker analyzer KHA1000
Relay outlet
Minimize wire length.
Minimize wire length.
See