Kikusui KHA1000, Operation Manual, Page: 38 / 274

2-8
KHA1000
Removing the handle
1.
Pull the handle covers upward (a: 2 positions).
2.
Remove the M4 flathead screws (b: 2 positions) and then remove the
entire handle (c and d).
Removing the side-panel rubber pads
Remove the rivets (e and f) on the bottom part of the rubber pads (g: 4 positions)
with the head of a flat-blade screwdriver.
2.3 Notes on Transfer
When transporting or moving this product to the installation location, note the
following:
 Turn off the POWER switch.
Transferring this product with the POWER switch turned on may result in
electric shock or damage.

Remove all connected wiring.
Transferring this product without removing its cables may result in personal
injury caused by disconnection or overturn.
 Fold down the stands.
Transferring this product with the stands raised may result in damage to the
stands.

When transporting this product, use the dedicated packing materials.
Otherwise, the product may be damaged by vibration or falling in transit.

Be sure to attach this manual.