Kikusui KHA1000, Operation Manual, Page: 28 / 274

1-6
KHA1000

Multi-outlet unit (option)
This unit is used for EUT that has a power cord with a plug. It can connect to
devices with a wide range of plugs used in various countries.
 Direct output to network printer (factory option)
Reports can be output through a network printer by using Ethernet
communication.

Application software SD005-KHA Harmonics Explorer (sold separately)
This software executes and controls the setting and testing of this product. It can
control the AC Power Supply used in the test.
1.4 Options
1.4.1 Multi-outlet Unit (OT01-KHA)
This unit is used for EUT that has a power cord with a plug. It can connect to
devices that have a wide range of plugs used in various countries.
• Internal impedance is designed to be low so that the unit conforms to the voltage
drop (less than 0.5 V) caused by the wiring impedance of a test system as
specified in IEC Standard 61000-4-7 (Ed2.0).
• This unit has a front grounding terminal that can ground a 2P plug with a
grounding conductor.
• The installation area is the same as this product, KHA1000. This unit can be
placed under the KHA1000.
1.4.2 Ethernet Port (Factory Option)
Reports can be printed through a network printer by using Ethernet communication.
Network protocol TCP/IP (LPR) is supported. The following printer definition
formats can be selected.
• Text
• ESC/Page (page definition language that is expanded for page printers with
printer control codes recommended by Seiko Epson.)
• PostScript (page definition language developed by Adobe Systems)