Kikusui KHA1000, Operation Manual, Page: 215 / 274

KHA1000
8-23
8
R
em
o
te
C
o
n
tr
o
l
8.7.2 Harmonic Measurement Mode
HARM:APOW:JIS:CONF
Queries the judgment result when the AC power source was checked and the
measured value was recorded.
• Use this command when JIS C61000-3-2(2005) or JIS C61000-3-2(2019)
standard is selected and a reference impedance is used.
Command
HARMonic:APOWer:JIS:CONFirm?
Response
Returns the judgment result in <"string"> format.
PASS: normal, FAIL: abnormal
HARM:APOW:EXEC
Queries whether the measured value was recorded when checking the AC power
source.
Command
HARMonic:APOWer:EXECute?
Response
Returns the recording of measured value in <NR1> format.
0: not implemented, 1: implemented or not required
HARM:STAN
Sets the test standard.
Command
HARMonic:STANdard
”{IEC:ED30A2:ED20A1|IEC:ED30A2:ED10|IEC:ED22:ED20|JI
S:2003:ED10|JIS:2005:ED20|IEC:ED22:ED10|JIS:2005:ED1
0|IEC:ED30:ED20|IEC:ED30:ED10|JIS:2011:ED10|JIS:2011
:ED20|JIS:2019:ED10|JIS:2019:ED20|IEC:ED50:ED10|IEC:
ED50:ED21}”
HARMonic:STANdard?
Parameter
Value:
“IEC :ED30A2:ED20A1 ” IEC Ed5.0/Ed2.1
“IEC :ED30A2:ED10 ” IEC Ed5.0/Ed1.0
“IEC :ED22:ED20 ” IEC Ed2.2/Ed2.0
“JIS :2003:ED10 ” JIS 2003/Ed1.0
“JIS2005 :ED20 ” JIS 2005/Ed2.0
“IEC :ED22:ED10 ” IEC Ed2.2/Ed1.0
“JIS2005 :ED10 ” JIS 2005/Ed1.0
“IEC :ED30:ED20 ” IEC Ed3.0/Ed2.0