Kikusui KHA1000, Operation Manual, Page: 191 / 274

KHA1000
7-9
7
O
th
er M
ea
su
re
m
en
ts
7.4 In-rush Current Measurement
This function monitors In-rush current waveforms exceeding the trigger level. It can
also monitor voltage waveforms.
After the reset trigger function key is pressed, the present waveform is maintained
until the current value exceeds the trigger level. The current range is fixed to 20 A.
The scale sensitivity is displayed on the upper part of the graph according to the
selected menu.
Fig.7-4 In-rush Current Measurement display
7.4.1 Current Trigger Level, View Setting, Reset
Trigger/Abort, and Voltage Range
Sub-Menu

In-rush Current Measurement  Sub Menu
F 1 F 1
F 2 F 2
F 3 F 3
F 4 F 4
F 5 F 5
F 6 F 6
Page 1/1
F1
Current Trigger
(A)
Numeric
value
Set the current trigger level. The trigger levels that can
be set range from 0.1 to 80.0. The numeric value
corresponds to the approximate current value (A).
F2
View Setting

Sub Menu
Horizontal
Scale
Vertical
Scale
(Current)
Vertical
Scale
(Voltage)
Cursor
F3
Reset TRG
Press Reset Trigger to wait for the next trigger.
Press Abort (waiting for trigger) to cancel Reset Trigger
(waiting for trigger).
Abort
(Wait for TRG)
F4 Voltage Range
150 V 300 V
Select the voltage range. The scale sensitivity is
displayed on the upper part of the graph according to
the selected range.