Kikusui KHA1000, Operation Manual, Page: 182 / 274

6-26
KHA1000
6.4.2 Printout of Setting Values (Test Conditions)
This section indicates the printout format for the setting values (test conditions).
Items differ depending on the test conditions.
Fig.6-9 Example of test conditions printout
Table 6-3 Explanation of test conditions items
Voltage Fluctuation and Flicker Test Condition Report
Memo
Model name
Type
Serial No.
d measuring method
Pst Auto
Voltage Range 300 V
Current Range 20 A
Nominal voltage 230 V
Nominal frequency 50 Hz
Overrange Abort Enabled
dmax limit value
6 %
Pst Measurement Time(s)
Pst Measurement Count 600 s
12 times
Flicker Margin
100 %
d Margin
100 %
Item Content Explanation
Memo Memo
Data input by view type of HA-
Observation and Analysis window

Results List, Voltage Fluctuation List

View Setting
Model Name Model name of EUT
Type Type of EUT
Serial No. Serial No. of EUT
d measuring method d measurement method
d measurement method input when
setting the test conditions
Voltage Range Voltage range
Voltage range input when setting the test
conditions
Current Range Current range
Current range input when setting the test
conditions
Nominal voltage Nominal voltage
Nominal voltage input when setting the
test conditions
Nominal frequency Nominal frequency
Nominal frequency input when setting the
test conditions
Overrange Abort Setting of Ends when over-range
Whether or not to “Overrange Abort”
specified when setting the test conditions
dmax limit value dmax limit value
dmax limit value input when setting the
test conditions
Time of d meas.
1-segment measurement time for d
measurement in Manual mode d measurement time input when setting
the test conditions
Number of d meas.
1-segment measurement count for d
measurement in Manual mode d measurement count input when setting
the test conditions
Flicker Margin Flicker margin
Margin for the Pst and Plt limit values
input when setting the test conditions
d Margin d margin
Margin for the limit values of dc, dmax,
and Tmax
*1
input when setting the test
conditions
Pst Measurement
Time(s)
Pst measurement time
Pst measurement time input when setting
the test conditions
Pst Measurement
Count
Pst measurement count
Pst measurement count input when
setting the test conditions
*1.Displayed as d(t)>3.3% depending on the selected standard.