Kikusui KHA1000, Operation Manual, Page: 119 / 274

KHA1000
5-17
5
H
arm
o
n
ic
C
u
rr
en
t T
es
t
Select an estimated maximum value in the operation cycle of the EUT. The peak
current that can be measured is four times the value in the 0.5 A to 10 A range and
2.5 times the value in the 20 A range.
•
The maximum value of the input current is 50 Apeak. Exceeding this
value may cause overheating of the current detector.
•
If the current detector overheats, the OHP icon is displayed in the upper
part of the window. In this case, immediately shut off the power to the
EUT to cut input current of this product. Restart the test after the OHP
icon disappears.
The peak current of the EUT is believed to be reached at maximum power. Keep in
mind the entire operation cycle of the EUT.
Nominal values (general values) of test voltage and frequency. Select them
according to the rating of the EUT.

Nominal value

Sub Menu
CAUTION
F5
Nominal Values

Sub Menu
Nominal
Voltage
Nominal
Frequency
F1 Nominal Voltage 100 V 120 V 200 V 230 V
F2
Nominal
Frequency
50 Hz 60 Hz