Kikusui IB022853, User Manual

Page: 28 / 52

28
Basic Operations KPM1000
Configuration settings
Use the configuration menu and the interface menu to set the configuration settings.
Menu operations
1
To configure the settings on the configuration menu, press CONFIG. To
configure the settings on the interface menu, press I/F (SHIFT+CONFIG).
When you press the CONFIG key, “ConF.”—which indicates that this is the
configuration menu—is shown on display A, the menu number is shown on display C,
the menu item name is shown on display B, and the selection is shown on display D.
When you press the I/F (SHIFT+CONFIG) key, “iF.”—which indicates that this is the
interface menu—is shown on display A, the menu number is shown on display C, the
menu item name is shown on display B, and the selection is shown on display D.
2
Press DSPL C or DSPL B to select the menu item.
The KPM1000 cycles through the items in increasing menu number order. Display B
and display D also change according to the menu item.
Press SHIFT+DSPL C or SHIFT+DSPL B to cycle through the items in decreasing
menu number order.
3
Press DSPL D to select the option that you want.
When you are setting an incremental numeric value, repeatedly press DSPL D to
increase the value. Repeatedly press SHIFT+DSPL D to decrease the value. If you
hold down the key, the value will increase or decrease more quickly.
To increase or decrease the integration time in units of 1 hour, press SHIFT+
▲
or
SHIFT+
▼
.
You can use the
▲
key and
▼
key to select the option in the same manner as the
DSPL D key.
4
If you want to select other items, return to step 2.
To finish configuring settings, press CONFIG, DSPL A, V RANGE, or I RANGE to return
to the measurement display.
5
If you made changes to the interface menu settings, restart the
KPM1000.
This will apply the changes that you have made.