Kikusui DSI1020, Installation Manual, Page: 3 / 64

DSI1020/ DSI3020
3
When you receive the product, check that all accessories are
included and that the accessories have not been damaged
during transportation. If something is damaged or missing,
contact your Kikusui agent or distributor.
We recommend that you save all packing materials, in case
the product needs to be transported at a later date.
 Accessories
The following options can be used with this product.
 USB interface (factory option)
A communication interface unit for controlling the product
through a USB interface.
To control the product from a PC via the USB interface, you
must install a device driver that supports the USB T&M class
(USBTMC; for Windows 7 or 8).
The USBTMC driver is installed automatically when the VISA
library is installed. For details on installing the VISA library,
see the SD009-PCR-LE application software setup guide.
 GPIB interface (factory option)
A communication interface unit for controlling the product
through a GPIB interface.
 Control power cable (heavy PVC jacketed
three-core)
This power cable is for connecting to the control power input
(AC INPUT) terminal on the rear panel of the product.
Model: AC5.5-3P3M-M4C
Type: Heavy PVC jacketed three-core cable
Length: 3 m
Nominal cross-sectional area: 5.5 mm
2
(AWG10 equiva-
lent)
Crimping terminal size: M4
Checking the package contents
Control cable
3 m (1 pc.)
Heavy object warning label (1 pc.)
Control board (1 card)
Operation manual (1 copy)
Model DSI1020 [A8-900-157]
Model DSI3020 [A8-900-158]
Screws (6 pcs.)
Model DSI1020 only
Control power cable
3 m (1 pc.)
[85-10-0650]
Plug: NEMA5-15
[85-50-0390] [UA-1894-01]
If you remove the rack
mount bracket, use these
screws to fix the side panels
in place.
Options