manualshive.com logo in svg

Kikusui BIM1000 Series, User Manual

Share
Download
Kikusui BIM1000 Series User Manual Download Page 42

42

User’s Manual

BIM1000 Series

System Settings

Initializing Settings

There are two methods to initialize this product. One method returns all the settings to their factory 
defaults, and the other returns a portion of the settings to their factory defaults (referred to as resetting).
When you reset the product, the settings return to their factory defaults except the measurement condi-
tions saved in memory and RS232C settings.

Returning all the settings to their defaults

To return all the settings in this product to their factory defaults 

(p. 44)

, follow the procedure below.

1

Press SYSTEM.

2

Press the 

←

 or 

→

 key to select Reset Function.

Each time you press the key, the item changes.

3

Press Syst Rst (F1) > YES (F5).

A single beep is generated, and the settings return to their factory defaults.

To cancel, press ESCAPE.

Summary of Contents for BIM1000 Series































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands