manualshive.com logo in svg

Kikusui BIM1000 Series, User Manual

Share
Download
Kikusui BIM1000 Series User Manual Download Page 25

BIM1000 Series

User’s Manual

25

Memory Function

Saving Measurement Conditions

Up to 100 sets (memory numbers 0 to 99) of the following measurement conditions can be saved to the 
internal memory.

• Sampling speed (SAMPLE)
• Average setting (AVERAGE)
• Trigger source (TRIG)
• Delay (DELAY)
• Resistance and voltage measurement ranges (RANGE)
• Resistance and voltage measurement upper judgment limit (UPPER) and lower judgment limit 

(LOWER)

• Unit of resistance judgment value (Ω/mΩ)
• Display state
• Key lock enabled/disabled
• Zero adjustment enabled/disabled

1

Set the measurement conditions.

2

Press STORE (SHIFT+VOLTAGE).

“STORE” appears in the top area of the display.

3

Use the numeric keypad to enter a memory number, and press ENTER.

The test conditions are saved to memory, and the saved memory number appears in the top area 
of the display.

This completes the setting.

Summary of Contents for BIM1000 Series































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands