7
level of waste fluid inside this canister and empty it as required. The waste fluid canister is emptied in the
following manner:
1. Disconnect the dispensing unit from the electrical power supply by disconnecting the power
transformer.
2. Open the cover using the triangular wrench supplied with the dispenser to turn the cover latch 45
degrees counterclockwise.
3. Remove the waste fluid canister to see if it needs to be emptied.
4. If the waste fluid canister is full and needs to be emptied, dispose of the waste fluid in an appropriate
manner. For more details on safe disposal, contact your local KiiltoClean representative or the
respective environmental authority.
5. Replace the waste fluid canister inside the dispenser. If you use the empty hand disinfectant canister
for this purpose, the canister must be marked accordingly.
6. Lock the cover using the triangular wrench supplied with the dispenser to turn the cover latch 45
degrees clockwise.
7. Reconnect the dispenser to the electrical power supply by connecting the power transformer plug to
the electrical outlet.
8. Check that the dispenser is operating properly (ref. 3.2.3).
5.1.2. Changing the hand disinfectant canister
1. Use only hand disinfectants approved by KiiltoClean.
