3
1. Application information
Sa is an automatic hand disinfectant dispenser designed for disinfection of hands in public areas
–
everywhere, where cross-contamination takes place, where people meet and where hands touch common
surfaces. The dispenser is designed especially for the automatic dispensing of hand disinfectant.
Use only hand disinfectants approved by KiiltoClean. KiiltoClean is not responsible for damages caused by
improper use of the dispenser, or if used for purposes other than described above or it has been modified
without permission from KiiltoClean.
Any structural or technical modifications or changes to the dispenser void the warranty.
Each unit must have a designated key user, who is responsible for the upkeep of the unit.
If you have a problem which cannot be solved by using this manual, please contact your local KiiltoClean
representative or distributor for additional information.
KiiltoClean Oy
–
Customer Service (Finland):
2. Assembly information
Please inspect the device upon receipt to make sure that it has not been damaged during shipment and that
all parts are included in the delivery. Remove each part individually from the package and compare it to the
list below. If parts are missing, please contact the supplier. If there are shipping damages, contact the
company responsible for the shipping.
The device includes the following components:
Sa dispenser
Waste fluid canister for the overflow pipe
Power transformer 110...230 VAC -> 24 VDC
Triangular wrench for opening the storage compartment
User manual for the hand disinfectant dispenser
Contact KiiltoClean if you store the hand disinfectant dispenser or the hand disinfectant for more than 3
months, or if the storage conditions do not conform to the required conditions. Use only hand disinfectants
approved by KiiltoClean. Do not use any other hand disinfectant with the Sa dispenser.
