A
Page 6 / 6
Product Description
RBW101, RBW103, RBW106, RBW108
Datasheet 1.10-51.012-01-EN
Issue 2018-02-05
Network installation
Network installation is performed using a network management tool based on LonWorks LNS3
network services.
Offline installation
The neuron ID of the technolon® room controller can be found on the included pull-off bar code label,
which is used for system documentation.
A simple bar code reader can be used for reading in the neuron ID.
Online installation
■ Online installation on the technolon® room controller RCNxxx-L:
The node is identified by manually inputting the neuron ID code or by activating the service PIN (1)
on the technolon® room controller RCNxxx-L.
■ Online installation on the RBW10x room control module:
The RCNxxx-L technolon® room controller can also be identified quickly and easily directly on the
RBW10x room control module using a magnet (5). To do so, guide a magnet (5) along the right side
of the RBW10x room control module.
Internally, this triggers the service PIN in the RCN room controller. This is indicated when the service
LED (4) on the top part of the RBW10x housing lights up green.
(1) Operating voltage and service LED
(2) Status LED
(3) Service PIN
RBW108
1
2
3
4
5
