Product Description
MD15-HE, MD15-R-HE
Q
Page 12 / 14
3.09-20.125-01-EN | 2019-08-19
Manual adjustment
!
CAUTION
Manual adjustment may only be performed when the actuator is installed.
►
Disconnect the actuator from the power supply.
►
Fold the cover nipple to the side.
►
A hexagon key (key socket 4 mm) can be used to move the actuator
into any position.
!
CAUTION
If you manually adjust until the slip clutch responds, turn the hexagon key half a turn in the opposite
direction after the manually set stroke position has been reached.
NOTE
An initialization run must be performed after a manual adjustment.
This occurs during operation when a valve end position is reached as part of normal operation.
You can perform this initialization manually by activating switch 6; see p. 13.
