• Assemble a Front Wheel (F), M8 Small Washer (J) to the front axle, and secure with a Nut (L). Then cover
with a Wheel Cover (G). Repeat the same process on the other side.
• Assemble a Rear Wheel (E), M8 Small Washer (J) to the rear axle, and secure with Nut (L). Then cover with
a Wheel Cover (G). Repeat the same process on the other side.
(L) Nut
(L) Nut
12LP (4 motors):
(F) Front Wheel
(E) Rear Wheel
(J) Small Washer
(M8 x 1.3mm)
(J) Small Washer
(M8 x 1.3mm)
(G) Wheel Cover
(G) Wheel Cover
Attention: In order to fully tightening the nuts on the rear axle to secure the rear
wheels, you need to use another spanner to hold another side nut on the rear axle.
And you may adjust the rear axle position when assemble the rear wheels.
Summary of Contents for 060-ROT-12L
Page 23: ......
