Item# 18301A - 18341
Allen Wrench x 1 pc
Assembly Instructions
Step 1
Complete
A
A. Hex Bolt x 4 pcs
(1 3/8 in , 35 mm)
C. Washer x 4 pcs
B. Spring Washer
x 4 pcs
C
B
A
C
B
A
C
B
A
C
B
Spindle Rocker
HARDWARE
1
2
PARTS LIST
2
Please retain this information for future reference
To order replacement parts, please visit www.kidkraft.com
1
1. Assemble the chair by holding Part 2 over Part 1 and placing the
bolts/washers in the holes. It may appear that the holes
don’t line up, but you should be able to guide the bolts into the holes.
The frame may have shifted in transit.
2. Tighten the bolts clockwise, turning each one so all four bolts go into
the four holes with even pressure. Stop when all bolts are set slightly
into the holes. (Don’t tighten two bolts in the left side then go back
and try to tighten two bolts in the right side.)
Customer Service
1-800-933-0771
www.kidkraft.com
1
USE AND MAINTENANCE:
-Use on level surfaces only
-Please check assembly at regular intervals, and
frequently tighten hardware if necessary. If
maintenance is not carried out, the product could
cease to function properly.
WARNING:
WARNING:
CHOKING HAZARD. Small parts and sharp points,
not suitable for children under 3 years.
ADULT ASSEMBLY REQUIRED. Product includes
small parts with potentially hazardous sharp points
and sharp edges in the unassembled state. Keep
unassembled parts away from children.
© 2006 KidKraft, LP
Before calling customer service, please
locate the batch code number
(example: 105906/65006/04) found on the
bottom or back of your product.
