KidKraft F29135 Installation And Operating Instructions Manual Download Page 1 | Manualshive

Page: 1 / 100

KidKraft F29135 Installation And Operating Instructions Manual Download Page 1

RYAN’S WORLD TWISTY TOWER PLAYSET - F29135

Rev 01/21/2019

9409135

Table of Contents

Warnings and Safe Play Instructions  .  .  .  .  . pg . 2
Protective Surfacing Guidelines    .  .  .  .  .  .  .  . pg . 3
Instructions for Proper Maintenance   .  .  .  .  . pg . 4
About Our Wood – Limited Warranty  .  .  .  .  . pg . 5
Keys to Assembly Success   .  .  .  .  .  .  .  .  .  .  .  . pg . 6
Part ID   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . pg . 7
Step-By-Step Instructions   .  .  .  .  .  .  .  .  .  .  .  . pg . 14
Installation of ID/Warning Plaque    .  .  .  .  .  pg . 97

KidKraft, Inc .

4630 Olin Road

Dallas, Texas 75244 USA

customerservice@kidkraft .com

canadacustomerservice@kidkraft .com

1 .800 .933 .0771

972 .385 .0100

For online parts replacement visit

https://parts .kidkraft .com/

KidKraft Netherlands BV

Olympisch Stadion 8

1076 DE Amsterdam

The Netherlands

europecustomerservice@kidkraft .com

+31 20 305 8620 M-F from 09:00 to 17:30

(GMT+1)

For online parts replacement visit

https://parts .kidkraft .eu/

INSTALLATION AND OPERATING INSTRUCTIONS

10-14 Hrs

Two person

assembly

FORT

2-4 Hrs

Two person

assembly

TUBE SLIDE

WARNING

To reduce the risk of serious injury or death, you must

read and follow these instructions. Keep and refer to these

instructions often and give them to any future owner of this

play system. Manufacturer contact information provided below.

OBSTACLE FREE SAFETY ZONE - 30' 2-1/4″ x 24′ 3-3/8″ (9.2m x 7.4m) area requires Protective Surfacing.

See page 3.

MAXIMUM VERTICAL FALL HEIGHT - 6′ 4″ (1.93m)
CAPACITY - 9 Users Maximum, Ages 3 to 10;

Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day

cares or parks.

WARNING. Only for domestic use.

FOR OUTDOOR FAMILY DOMESTIC USE ONLY

11' 5/8"

336 .87cm

30' 2-1/4"

9 .2m

24' 3-3/8"

7 .4m

16' 9-5/8"

512 .2cm

1
2
3
...
»

Summary of Contents for F29135





































































































Reviews:

No comments