ATTENTION! The model SLED177iCA strobe light is designed to notify hearing impaired
individuals of impending danger, they have no detection means and MUST be used in
conjunction with operating Smoke, Heat, or Carbon Monoxide Alarms.
The model SLED177iCA AC wire-in Strobe light can be directly interconnected with
Kidde 3-wire Smoke, Heat and CO alarms. It will produce an intermittent flash pattern
(approximately 4 flashes, followed by approximately 5 seconds off) when triggered by a
Carbon Monoxide alarm and flash every second when triggered by a smoke or heat
alarm.
Thank you for purchasing this strobe light. It is an important part of your family’s home
safety plan. You can trust Kidde to provide the highest quality safety products. We know
you expect nothing less when the lives of your family are at stake.
For model: SLED177iCA
P/N 1102-7202-00 EN Rev. A
Strobe
Light
For your convenience, write down the following information. If you call
our Product Support Line, these are the first questions you will be asked:
Strobe Light Model Number
(located on back of alarm):
Date Code (located on back of device):
Date of Purchase:
Where Purchased:
SLED177iCA
Strobe Light User Guide
1102-7202-00_RevA_SLED177iCA_MAN_EN:_ 2013.6.3 3:21 PM Page 1