background image

EXTREMELY FAST VEHICLE.  ONLY USE OUTDOORS IN LARGE, OPEN AREA.

NOT RECOMMENDED FOR USE ON AREAS WITH GRASS, ROCKS, DIRT OR WATER.

REVERSE

FORWARD

FORWARD

REVERSE

POWER ON

WARNING:

 

HIGH PERFORMANCE MOTOR

Do not overload the motor in 

branches, sand, mud, swamps, etc. 

that prevent the car from moving 

and creates extra work for the motor. 

When car is stuck, avoid running 

the motor repeatedly.  Walk to vehicle 

(sorry) and remove the vehicle 

from the obstacle.

ALLOW MOTOR TO COOL PROLONGS 

MOTOR LIFE

Periodically, allow the motor and 

battery to cool between races. Use 

of a higher amperage battery requires 

intermittent breaks. If the motor 

is very hot to the touch, discontinue 

use until the motor has cooled.

BATTERY USE

Included battery should be charged 

only with included charger. Use of 

compatible 20 volt batteries that fit 

is encouraged, and these batteries 

should only be charged with their 

respective charger. Flip battery 

connecter mechanism as it does not 

lock into place.  If not aligned, battery 

cannot be installed.

SAFETY FIRST

You are the owner of an extremely 

powerful radio control product that 

will exceed speeds of 25MPH. 

Use with care to avoid product 

damage or personal injury.

CONTROLLER: FORWARD/REVERSE

1. Pull inward on lever of transmitter to propel 

  vehicle forward.

2. Release lever to neutral position to allow 

  car to stop.

3. Push outward on lever of transmitter to 

  propel vehicle in reverse.

4. Avoid moving lever inward or outward 

  without allowing vehicle to come to a 

  complete stop.

TROUBLESHOOT HELP. CALL US! 1-800-816-1135 or email: [email protected]

TURN LEFT

FORWARD

TURN RIGHT

TURN LEFT

TURN RIGHT

CONTROLLER BATTERY INSTALLATION

Install included AAA batteries into controller.

UNLOCK VEHICLE SURFACE

Remove vehicle surface locks/pins.

To re-attach body, push pins all the way to lock body in place.

LOAD THE BATTERY

CHARGE THE BATTERY

The included charger is designed to charge the included 20V battery. 

Allow for at least a 3 hrs and 45 mins charge before use. Alternatively, you can 

use any fully charged 20 volt compatible battery from Black & Decker, 

Dewalt, Porter-Cable, or Stanley. Many 20V batteries from these 

manufacturers that are under 3.0Ah should fit.

1. Attach the charger to the 20v battery. 

2. Plug charger in wall.

3. Battery is charging and shows level 

    of charge as lights blink. Fully 

    charged when lights are solid. 

CHARGE TIME: 

3 hours and 45 minutes 

Push until

“CLICKS”

RELEASE BATTERY

Press the lock at the end 

of the battery to release 

from the car. 

Examine battery charger regularly for any damage to cord, plug, enclosure, and other parts.

In the event of such damage, discontinue use until repaired.

QUICK 

START 

GUIDE

QUICK 

START 

GUIDE

Item number.: 10317

CONTROLLER: TURNING

Turn wheel to change direction while traveling.

POST RACE

Turn vehicle off.

Disconnect battery from vehicle 

and remove it.

Turn transmitter off.

Live to race another day.

Reviews: