background image

CONGRATULATIONS! The new c-Series KICKER XPL™ subwoofers feature the

latest advancements in loudspeaker design from Stillwater Designs, the most
famous name in car audio subwoofers.

XPL™ C-SERIES

HIGH OUTPUT SUBWOOFERS

FEATURES OF KICKER C-SERIES XPL

Cast Aluminum Basket -

Precision alignment and motor structure support

Hemispherical Polymineral Cone w/ -

High rigidity under pressure for accurate linear control

ISD™ (Inverted Structural Dome)  -

Stops enclosure pressure loss to reduce “pump-down”

-

High internal dampening

-

Excellent sunlight, pollution and moisture resistance

Double Stitched Surround -

Prevents cone/surround separation at high excursions

Blackened Pole Piece -

Improved heat transfer

Uniplate™ -

Improved thermal and magnetic transfer between pole 

and backplate

Extended Pole Piece -

Cooler operation increases power handling

-

Improved magnetic field linearity around the voice coil gap 

Vented Pole Piece -

Pressure relief under the center dome improves low bass

Extended Backplates -

Prevent damaging voice coil “bottoming”

Perimeter Venting -

Measurably lower operating temperature and freer 

cone motion

Hi-Temp Kapton Voice Coil Formers -

Protects against warped, rubbing voice coils

Long Throw Voice Coil -

Enormous cone excursion capabilities

High Power Lead Wires -

Stops lead breakage

-

Reduces power robbing resistance losses

RECOMMENDED ENCLOSURES

The c-Series XPL subwoofers are designed to be installed in small sealed enclosures. 

Stillwater Designs has been using sealed enclosures in its show vehicles for a number of
years. They have proven to be very reliable, with highly predictable performance, even
under extreme power demands. The sealed enclosure sound is very tight and controlled,
yet very “full” and solid, with extended low bass response.

The table on the following page shows suitable enclosure volumes for XPL drivers. Note:

a larger box improves low bass performance; a smaller box produces more mid-bass
“bump”. Consider the type of “sound” you want, and the amount of space in your vehicle,
then you can choose the appropriate enclosure to produce it.

Summary of Contents for XPL C-SERIES

Page 1: ...er the center dome improves low bass Extended Backplates Prevent damaging voice coil bottoming Perimeter Venting Measurably lower operating temperature and freer cone motion Hi Temp Kapton Voice Coil Formers Protects against warped rubbing voice coils Long Throw Voice Coil Enormous cone excursion capabilities High Power Lead Wires Stops lead breakage Reduces power robbing resistance losses RECOMME...

Page 2: ... used and carefully seal around the wire with silicone sealer This is also very important to maintain a perfect seal in the box All the recommended enclosure specs require a 50 fill of polyester fiber Commonly called fiberfill it is normally used as pillow stuffing If the woofer mounting hole is not cut exactly to specifications there is a good chance that air can leak out through the screw holes ...

Page 3: ...icult to tell when a woofer is getting a clipped signal because the larger speakers don t reproduce distortion very well Any time the sound quality changes as you turn the volume past a certain point you can be assured that the amplifier has reached its limitations and should be turned down SPECIFICATIONS Maximum Amp Frequency Mounting Mounting Size Impedance Power Sensitivity Response Depth Hole ...

Page 4: ...with equivalent products This warranty is valid only for the original purchaser and is not extended to owners of the product sub sequent to the original purchaser Any applicable implied warranties are limited in duration to a period of the express warranty as provided herein beginning with the date of the original purchase at retail and no warranties whether express or implied shall apply to this ...

Reviews: