The KICKER Impulse BassStation is a great way to easily and economically
add real KICKER bass to you system. Installation is simple, and the sound is
ALL KICKER!
IMPULSE BassStation™
PC10, PC12 Powered Car & PT8, PT10
Powered Truck Subwoofer Systems
Features of the Impulse BassStations
• Built-In Amplifier
• Active Electronic Crossover – 90Hz at 12dB with equalization circuit.
• Universal Inputs
• Audio-Activated Auto Turn-On
• Gain Control
• Lower Power Requirements – Full power requires less than 10 Amps of current.
Installation Information
The position of your KICKER Impulse BassStation will affect the quality and the amount
of the bass it reproduces. The best results will come from boundary loading the output of
the BassStations into the corners of the vehicle. Both PC & PT speaker systems contain
woofer(s) on the front side of the enclosure and then ports on either end, depending on
model and amplifier location. Directing the ports toward specific locations in the vehicle will
control which portion of the bass gets reinforced. Firing the ports into the corners of the
vehicle will boost the lower frequencies while positioning the ports away from the corners
will increase the output of the upper bass.
Specifications
Model
Subwoofer
Frequency
Length
Top Width
Base Width
Height
Response (Hz)
PC10
10 Inch
35-90
18"
10-3/16"
12-3/4"
12-1/4"
PC12
12 Inch
32-90
20-1/2"
11-1/16"
14"
14"
PT8
8 Inch
38-90
19"
4"
6-7/8"
13-1/16"
PT10
10 Inch
35-90
21-1/2"
4-3/16"
7-1/4"
14-1/2"
Common to all Models:
Input Sensitivity – 100mV to 10V
Crossover – 90Hz at 12dB/octave
