3
ROMEX NM CABLE INSTALL:
OR
NOTE:
For mounting instructions, depending on the wiring type, please refer to page 4 for the
mounting diagram.
• Remove the 4 screws around the edge of the mirror frame and remove face of mirror.
• Remove the knockout in the back of the mirror located closest to where the romex nm cable exits
the wall.
• Install a NM cable connector clamp (not included) into the knockout hole.
• Pass romex nm cable through the clamp and secure.
-
WHITE (NEUTRAL) ROMEX SUPPLY WIRE TO THE WHITE (OR RIBBED)
MIRROR WIRE.
-
BLACK (LIVE) ROMEX SUPPLY WIRE TO THE BLACK (OR SMOOTH) MIRROR
WIRE.
-
GREEN OR BARE COPPER ROMEX SUPPLY WIRE TO THE GREEN OR BARE
COPPER MIRROR WIRE.
• Wirenut the supply cable wires to the SVT exiting
the terminal block.
WIRE
TERMINAL
BLOCK
WIRE
TERMINAL BLOCK
