Kia XCeed 2020, Owner'S Manual, Page: 604 / 725

Maintenance Wiper blades
8
54
For your convenience, move the
windshield wiper blades to the
service position as follows;
After turning off the engine, move
the wiper switch to the single wiping
(MIST) position within 20 seconds
and hold the switch more than 2
seconds until the wiper blade is in
the fully up position.
CAUTION
Do not allow the wiper arm to fall
against the windshield, since it may
chip or crack the windshield.
1. Raise the wiper arm.
ODEEV098016NR
2. Lift up the wiper blade clip. Then
pull down the blade assembly and
remove it.
ODEEV098017NR
3. Install the new blade assembly.
4. Return the wiper arm on the
windshield.
5. Turn ignition to the ON position
and wiper arms will return to the
normal operating position.
Rear window wiper blade
1. Raise the wiper arm and pull out
the wiper blade assembly.
OCDW079117
2. Install the new blade assembly by
inserting the center part into the
slot in the wiper arm until it clicks
into place.