Kia XCeed 2020, Owner'S Manual, Page: 592 / 725

Maintenance Engine coolant
8
42
Turn the engine off and wait until it
cools down. Use extreme care when
removing the radiator cap. Wrap
a thick towel around it, and turn it
counterclockwise slowly to the first
stop. Step back while the pressure is
released from the cooling system.
When you are sure all the pressure
has been released, press down on
the cap, using a thick towel, and
continue turning counterclockwise to
remove it.
Even if the engine is not operating,
do not remove the radiator cap or
the drain plug while the engine and
radiator are hot. Hot coolant and
steam may still blow out under
pressure, causing serious injury.
WARNING
The electric motor
(cooling fan) is
controlled by engine
coolant temperature,
refrigerant pressure
and vehicle speed. It may sometimes
operate even when the engine is not
running. Use extreme caution when
working near the blades of the
cooling fan so that you are not
injured by a rotating fan blades. As
the engine coolant temperature
decreases, the electric motor will
automatically shut off. This is a
normal condition. The electric motor
(cooling fan) may operate until you
disconnect the negative battery
cable.
Kappa 1.0L T-GDI Engine (Gasoline) /
Kappa 1.4L T-GDI Engine (Gasoline)
OCDW079007
Kappa 1.4L MPI Engine (Gasoline) /
Gamma 1.6L MPI Engine (Gasoline)
OCDW079108