Kia XCeed 2020, Owner'S Manual, Page: 47 / 725

3
Safety features of your vehicle Seats
3
19
position, always be sure it has
locked into position by pushing on
the top of the seatback.
If you can not see the red line
at the bottom of folding lever,
it means the seatback is locked
completely.
2. Return the rear seat belt to the
proper position.
3. When the seatback is completely
installed, check the seatback
folding lever again.
To fold down the rear center
seatback separately (for Wagon,
Shooting Brake and CUV) (if
equipped)
OCDW039057
Long objects can be stored by
folding the rear center seatback,
without having to fold all rear seats.
See below steps for folding the rear
center seatback.
1. Lower the rear center headrest to
the lowest position.
2. Pull the armrest forward from the
seatback.
3. Pull the lever (1) to unlock the
center seatback.
4. After unlocking, pull forward the
center seatback and fold it.
WARNING
Uprighting seat
When you return the seatback to its
upright position, hold the seatback
and return it slowly. If the seatback
is returned without holding it,
the back of the seat could spring
forward resulting in injury caused by
being struck by the seatback.
WARNING
After folding the rear seat, unless
the driver’s position is properly set
according to the driver’s physical
figure, do not fold the rear seat.
It may increase body injuries in a
sudden stop or collision.
WARNING
When you return the rear seatback
to its upright position after being
folded down:
Be careful not to damage the seat
belt webbing or buckle. Do not allow
the seat belt webbing or buckle to
get caught or pinched in the rear
seat. Ensure that the seatback is
completely locked into its upright
position by pushing on the top
of the seatback. Otherwise, in an