Kia XCeed 2020, Owner'S Manual, Page: 464 / 725

6
Driving your vehicle Distance 4 Distance 3 Distance 2 Distance 1
6
137
switch to the ON position and by
selecting “User Settings → Driver
assistance → Blind-spot safety”
- The BCW turns on and gets
ready to be activated when
‘Warning only’ is selected. Then,
if a vehicle approaches the
driver’s blind spot area a warning
sounds.
- The system is deactivated and
the indicator on the BCW button
is extinguished when ‘Off‘ is
selected.
• If you press BCW button while
‘Warning only’ is selected
the indicator on the button
extinguishes and the system
deactivates.
• If you press BCW button while the
system is cancelled the indicator
on the button illuminates and the
system activates. In this case,
the system returns to the state
before the engine turned off.
Warning type
The system will activate when:
1. The system is on.
2. Vehicle speed is above 30 km/h
(18.6 mph)
3. Other vehicles are detected in the
rear side
WARNING
• Always check the road condition
while driving for unexpected
situations even though the Blind-
Spot Collision Warning System
(BCW) is operating.
• The Blind-Spot Collision Warning
System (BCW) is a supplemental
system to assist you. Do not
entirely rely on the system.
Always pay attention, while
driving, for your safety.
• The Blind-Spot Collision Warning
System (BCW) is not a substitute
for proper and safe driving.
Always drive safely and use
caution when changing lanes or
backing the vehicle up. The Blind-
Spot Collision Warning System
(BCW) may not detect every
object alongside the vehicle.
1st stage
ODEEV078091NR
If a vehicle is detected within the
boundary of the system, a warning
light will illuminate on the outside
rearview mirror.
If the detected vehicle is not in
detection range, the warning will be
turned off.