Kia XCeed 2020, Owner'S Manual, Page: 373 / 725

Driving your vehicle Brake system
6
46
2. Pull up the EPB switch for more
than 3 seconds.
CAUTION
Do not operate the parking brake
while the vehicle is moving except
in an emergency situation. It could
damage the vehicle system and
endanger driving safety.
Releasing the parking brake
OCDW059032
To release the EPB (electronic
parking brake), press the EPB
switch in the following condition:
• Have the ignition switch or ENGINE
START/STOP button in the ON
position.
• Depress the brake pedal.
Make sure the brake warning light
goes off.
To release EPB (electronic parking
brake) automatically:
• Shift lever in P (Park)
With the engine running depress
the brake pedal and shift out of P
(Park) to R (Rear) or D (Drive).
• Shift lever in N (Neutral)
With the engine running depress
the brake pedal and shift out of N
(Neutral) to R (Rear) or D (Drive).
• Manual transmission vehicle
1. Start the engine.
2. Fasten the driver’s seat belt.
3. Close the driver’s door, engine
hood and trunk.
4. Depress the clutch pedal with
the gear engaged.
5. Depress the accelerator pedal
while releasing the clutch pedal.
• Automatic transmission vehicle
1. Start the engine.
2. Fasten the driver’s seat belt.
3. Close the driver’s door, engine
hood and trunk.
4. Depress the accelerator pedal
while the shift lever is in R
(Rear), D (Drive) or Sports
mode.
Make sure the brake warning light
goes off.
NOTICE
• For your safety, you can engage
the EPB even though the ignition
switch or engine stop/start button
is in the OFF position, but you
cannot release it.