Kia XCeed 2020, Owner'S Manual, Page: 261 / 725

4
Features of your vehicle Windshield defrosting and defogging
4
163
3. Press the defrost button ( ).
4. The air conditioning will be turned
on according to the detected
ambient temperature and outside
(fresh) air position will be selected
automatically.
If the air conditioning and outside
(fresh) air position are not
selected automatically, adjust the
corresponding button manually. If
the
position is selected, lower
fan speed is adjusted to a higher fan
speed.
To defrost outside windshield
OCDW049315
1. Set the fan speed to the highest
(extreme right) position.
2. Set the temperature to the
extreme hot (HI) position.
3. Press the defrost button ( ).
4. The air conditioning will be turned
on according to the detected
ambient temperature and outside
(fresh) air position will be selected
automatically.
If the position is selected, lower
fan speed is adjusted to a higher fan
speed.
Defogging logic (if equipped)
To reduce the possibility of fogging
up the inside of the windshield, the
air intake or air conditioning are
controlled automatically according to
certain conditions such as
or
position. To cancel or return to the
defogging logic, do the following.
Manual climate control system
OCDW049330
1. Turn the ignition switch to the ON
position.
2. Turn the mode selection knob to
the defrost position ( ).
3. Push the air intake control button
at least 5 times within 3 seconds.
The indicator light in the air intake
control button will blink 3 times.
It indicates that the defogging
logic is canceled or returned to the
programmed status.