Kia XCeed 2020, Owner'S Manual, Page: 231 / 725

4
Features of your vehicle Wipers and washers
4
133
the OFF (○) position. Otherwise,
wipers may operate and ice may
damage the windshield wiper
blades. Always remove all snow
and ice and defrost the windshield
properly prior to operating the
windshield wipers.
• When tinting the windshield, be
careful of any fluid getting into
the sensor located in the top
center of the front windshield. It
may damage the related parts.
Windshield washers
OCDW049020
In the OFF (○) position, pull the lever
gently toward you to spray washer
fluid on the windshield and to run
the wipers 1-3 cycles.
Use this function when the
windshield is dirty.
The spray and wiper operation will
continue until you release the lever.
If the washer does not work, check
the washer fluid level. If the fluid
level is not sufficient, you will need
to add appropriate non-abrasive
windshield washer fluid to the
washer reservoir.
The reservoir filler neck is
located in the front of the engine
compartment on the passenger side.
CAUTION
To prevent possible damage to the
washer pump, do not operate the
washer when the fluid reservoir is
empty.
WARNING
Do not use the washer in freezing
temperatures without first warming
the windshield with the defrosters;
the washer solution could freeze
on the windshield and obscure your
vision.
CAUTION
• To prevent possible damage to
the wipers or windshield, do not
operate the wipers when the
windshield is dry.
• To prevent damage to the wiper
blades, do not use gasoline,
kerosene, paint thinner, or other
solvents on or near them.
• To prevent damage to the wiper
arms and other components, do
not attempt to move the wipers
manually.