Kia XCeed 2020, Owner'S Manual, Page: 13 / 725

Introduction Vehicle break-in process
1
7
1
Vehicle break-in process
No special break-in period is
needed. By following a few simple
precautions for the first 1,000 km
(600 miles) you may increase the
performance, economy and life of
your vehicle.
• Do not race the engine.
• While driving, keep your engine
speed (rpm, or revolutions per
minute) within 3,000 rpm.
• Do not maintain a single speed for
long periods of time, either fast
or slow.Varying engine speed is
needed to properly break-in the
engine.
• Avoid hard stops, except in
emergencies, to allow the brakes
to seat properly.
• Don't tow a trailer during the
first 2,000 km (1,200 miles) of
operation.
Risk of burns when parking or
stopping vehicle
• Do not park or stop the vehicle
near flammable items such as
leaves, paper, oil, and tire. Such
items placed near the exhaust
system can become a fire hazard.
• When an engine idles at a high
speed with the rear side of the
vehicle touching the wall, heat
of the exhaust gas can cause
discoloration or fire. Keep enough
space between the rear part of
the vehicle and the wall.
• Be sure not to touch the exhaust/
catalytic systems while engine is
running or right after the engine is
turned off. There is a risk of burns
since the systems are extremely
hot.