Home
/
Kia
/
Telluride 2023
/
Manual

Kia Telluride 2023, Manual, Page: 206 / 524

Share

Page: 206 / 524

Kia Telluride 2023 Manual Download Page 206

Features of your vehicle

124

4

Automatic climate control system

Heating and air conditioning manually

The heating and cooling system can be controlled manually by pressing buttons or
turning knob(s) other than the AUTO button.

In this case, the system works sequentially according to the order of buttons or
knob(s) selected.
1. Start the vehicle.
2. Set the mode to the desired position.

For improving the effectiveness of heating and cooling;

僅 Heating:

僅 Cooling:

3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.

If air conditioning is desired, turn the air conditioning system on.

Press the AUTO button in order to convert to fully automatic control of the system.

OON042303

«
...
204
205
206
207
208
...
»

Summary of Contents for Telluride 2023













































































































































































































































































































































































































































































































































Reviews:

No comments