Kia Stonic, Owner'S Manual, Page: 379 / 514

Check the condition and connections of
all cooling system hoses and heater ho‐
ses. Replace any swollen or deteriora‐
ted hoses.
The coolant level should be filled be‐
tween MAX and MIN (F and L) marks on
the side of the coolant reservoir when
the engine is cool.
If the coolant level is low, add enough
distilled (deionized) or soft water. Bring
the level to MAX (F), but do not overfill.
If frequent additions are required, have
the system inspected by a professional
workshop. Kia recommends to visit an
authorized Kia dealer/service partner.
Recommended engine coolant
• When adding coolant, use only deion‐
ized water or soft water for your ve‐
hicle and never mix hard water in the
coolant filled at the factory. An im‐
proper coolant mixture can result in
serious malfunction or engine dam‐
age.
• The engine in your vehicle has alumi‐
num engine parts and must be pro‐
tected by an ethylene-glycol with
phosphate based coolant to prevent
corrosion and freezing.
• DO NOT USE alcohol or methanol
coolant or mix them with the speci‐
fied coolant.
• Do not use a solution that contains
more than 60% antifreeze or less
than 35% antifreeze, which would re‐
duce the effectiveness of the solu‐
tion.
For mixture percentage, refer to the
following table.
Ambient
Tempera‐
ture
Mixture Percentage
(volume)
Antifreeze Water
-15°C (5°F) 35 65
8-49
8
Maintenance