Kia Stonic, Owner'S Manual, Page: 276 / 514

The second stage alarm will activate
when:
1. The first stage alert is on
2. The turn signal is on to change a
lane
When the second stage alert is activa‐
ted, a warning light will be blinking on
the outside rearview mirror and an
alarm will sound.
If you move the turn signal switch to
origin position, the second stage alert
will be deactivated.
-
The second stage alarm can be deac‐
tivated.
• To activate the alarm:
Go to the User Settings Mode Driv‐
ing Assist and select Blind-Spot Colli‐
sion Warning Sound on the LCD dis‐
play.
• To deactivate the alarm :
Go to the User Settings Mode Driv‐
ing Assist and deselect Blind-Spot
Collision Warning Sound on the LCD
display.
CAUTION
The alarm function helps alert the
driver. Deactivate this function only
when it is necessary.
Detecting sensor
The sensors are located inside the rear
bumper.
Always keep the rear bumper clean for
the system to work properly.
Warning message
The message (“Blind-Spot Collision
Warning (BCW) system disabled. Radar
blocked”) will appear to notify the driv‐
er if there are foreign substances on
the rear bumper or it is hot near the
rear bumper. The light on the switch
and the system will be turned off auto‐
matically.
Remove the foreign substance on the
rear bumper.
Driving your vehicle
6-62