Kia Stonic, Owner'S Manual, Page: 163 / 514

Loading condition Switch position
Driver only 0
Front
passenger
0
Full passengers
(including driver)
1
Full passengers
(including driver) +
Maximum permis‐
sible loading
2
Maximum
permissible load‐
ing
3
High beam Assist (if equipped)
The High Beam Assist is a system that
automatically adjusts the headlamp
range (switches between high beam
and low beam) according to the bright‐
ness of other vehicles and road condi‐
tions.
Operating condition
1. Place the light switch in the AUTO
position.
2. Turn on the high beam by pushing
the lever away from you.
The High Beam Assist ( ) indicator
will illuminate.
3. The High Beam Assist will turn on
when vehicle speed is above 45 kph
(28 mph).
• If the lever is pushed away when
the High Beam Assist is operat‐
ing, the High Beam Assist will
turn off and the high beam will
be on continuously. The High
Beam Assist ( ) indicator will
turn off.
• If the lever is pulled towards you
when the high beam is on with
operating High Beam Assist, the
High Beam Assist will turn off.
4. If the light switch is placed to the
headlamp position, the High Beam
Assist will turn off and the low
beam will be on continuously.
The high beam switches to low beam in
the below conditions.
- When the High Beam Assist is off.
- When the light switch is not in the
AUTO position.
- When the headlamp is detected from
the on-coming vehicle.
- When the tail lamp is detected from
the front vehicle.
- When the surrounding is bright
enough high beams are not needed.
4-83
4
Featur
es of your v
ehicle