Kia Stonic 2019, Owner'S Manual, Page: 550 / 611

8 129
Maintenance
5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
7. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
8. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
9. Install the rear combination lamp
assembly to the body of the vehicle.
Stop and tail lamp bulb
replacement
1. Open the tail gate.
2. Loosen the light assembly retain-
ing screws with a cross-tip screw-
driver.
OYB077099
OYB077060