manualshive.com logo in svg

Kia Stonic 2019, Owner'S Manual, Page: 356 / 611

Share
Download
Kia Stonic 2019 Owner'S Manual Download Page 356

6 101

Driving your vehicle

System standby

The Driver Attention Warning system
enters the ready status and displays
the 'Standby' screen in the following
situations.
- The camera does not detect the

lanes.

- Driving speed remains under 60

km/h (37 mph) or over 200 km/h
(125 mph).

System malfunction

When the "Check Driver Attention
Warning (DAW) system" warning
message appears, the system is not
working properly. In this case, have
the vehicle inspected by a profes-
sional workshop. Kia recommends to
visit an authorised Kia dealer/service
partner.

OYB057088L

OYB057089L

WARNING  

• The Driver Attention Warning

system is not a substitute for
safe driving practices, but a
convenience function only. It
is the responsibility of the
driver to always drive cau-
tiously to prevent unexpected
and sudden situations from
occurring. Pay attention to the
road conditions at all times.

• The system may suggest a

break according to the dri-
ver's driving pattern or habits
even if the driver doesn't feel
fatigue.

• The driver, who feels fatigued,

should take a break, even
though there is no break sug-
gestion by the Driver
Attention Warning system.

Summary of Contents for Stonic 2019




































































































































































































































































































































































































































































































































































































































Reviews:

No comments