Kia Stonic 2019 Owner'S Manual Download Page 354

Page: 354 / 611

6 99

Driving your vehicle

The Driver Attention Warning (DAW)
system system displays the condition
of the driver's fatigue level and inat-
tentive driving practices.

System setting and activation

System setting

• The Driver Attention Warning sys-

tem is set to be in the OFF posi-
tion, when your vehicle is first
delivered to you from the factory.

• To turn ON the Driver Attention

Warning system, turn on the engine,
and then select 'User Settings

→

Driver Assistance

→

Driver Attention

Warning

→

Off/Normal/High' on the

LCD display.

• The driver can select the Driver

Attention Warning system mode.
- Off : The Driver Attention Warning

system is deactivated.

- Normal : The Driver Attention

Warning system alerts the driver
of his/her fatigue level or inatten-
tive driving practices.

- High : The Driver Attention Warning

system alerts the driver of his/her
fatigue level or inattentive driving
practices faster than Normal mode.

• The set-up of the Driver Attention

Warning system will be main-
tained, as selected, when the
engine is re-started.

Display of the driver's attention
level

DRIVER ATTENTION WARNING (DAW) SYSTEM (IF EQUIPPED)

OYB057087L

■

System off

OYB057078L

■

Attentive driving

OYB057077L

■

Inattentive driving

Summary of Contents for Stonic 2019




































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Stonic 2019

Reviews:

Kia Stonic 2019, Owner'S Manual, Page: 354 / 611

Search results

Summary of Contents for Stonic 2019

Reviews: