manualshive.com logo in svg

Kia Stonic 2019, Owner'S Manual, Page: 171 / 611

Share
Download
Kia Stonic 2019 Owner'S Manual Download Page 171

Features of your vehicle

80

4

Malfunction Indicator
Lamp (MIL)

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It remains on until the engine is
started.

• When there is a malfunction with

the emission control system.
In this case, have the vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service part-
ner.

CAUTION - 

Malfunction

Indicator Lamp (MIL)

Driving with the Malfunction
Indicator Lamp (MIL) on may
cause damage to the emission
control systems which could
effect drivability and/or fuel
economy.

CAUTION - 

Petrol Engine

If the Malfunction Indicator
Lamp (MIL) illuminates, poten-
tial catalytic converter damage
is possible which could result in
loss of engine power.
In this case, have the vehicle
inspected by a professional
workshop as soon as possible.
Kia recommends to visit an
authorised Kia dealer/service
partner.

CAUTION - 

Diesel Engine

If the Malfunction Indicator Lamp
(MIL) blinks, some error related
to the injection quantity adjust-
ment occurs which could result
in loss of engine power, combus-
tion noise and poor emission.
In this case, have the engine
control system inspected by a
professional workshop. Kia rec-
ommends to visit an authorised
Kia dealer/service partner.

Summary of Contents for Stonic 2019




































































































































































































































































































































































































































































































































































































































Reviews:

No comments