Headlight position
Parking light position
AUTO
*
Auto Light* / LBA position
DRL/OFF
OFF or DRL OFF position
Headlight position
Tail Light position
AUTO
Auto Light / LBA-D* /
High Beam Assist*
OFF
OFF position
Headlights & High Beams
AUTO Light
– When the light switch is in the AUTO Light position, the tail lights and headlights will turn
ON/OFF automatically depending on the amount of light outside the vehicle .
Low Beam Assist-Dynamic (LBA-D) / Dynamic Bending Light (DBL)*
– LBA can help improve visibility
during nighttime driving by aiming the low-beam headlights toward the direction the vehicle is moving . LBA
controls the aiming direction based on steering angle and speed .
When the light switch is in the AUTO light position, LBA will activate .
High Beam Assist (HBA)
– High Beam Assist is designed to automatically adjust the headlight range by
switching between high and low beams based on light detected from other vehicles and road conditions .
To enable HBA, toggle the light switch to the AUTO Light position and turn on the high beams by pushing
the lever away from you . The High Beam Assist indicator will illuminate .
Daytime Running Lights (DRL)
– DRL can make it easier for others to see the front of your vehicle during
the day . The lights will be on automatically unless one of the following occurs:
•
Headlights are on
•
Parking brake is applied
•
Switch is in the DRL OFF position
•
Engine is turned off
Headlight / High Beam Lever Operation
•
Rotate lever switch to change the headlight function:
•
Press lever away from you to turn high beam headlights ON
•
Pull lever to flash headlights/high beams
See section 4 in the Owner’s Manual for more information .
STEERING WHEEL
CONTR
OL
S
STEERING WHEEL CONTROLS
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE
OPERATING INFORMATION AND SAFETY WARNINGS .
*IF EQUIPPED
29
REMINDERS:
•
High Beam Assist does not operate below certain speeds, or in some lighting and driving conditions . Please be aware of
your surroundings and exercise proper road etiquette when operating a vehicle using the high beams .
•
HBA will operate when vehicle speed exceeds 25 mph
•
If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on continuously .
If the lever is pulled toward you while HBA is operational, HBA will turn off
•
If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
•
DRL only operates during the daytime
REMINDER:
When the
LBA indicator illuminates on
the instrument cluster, the
LBA is not working properly .
See authorized Kia dealer
for service .