
SATELLITE RADIO RECEPTION
Satellite radio reception requires a direct line of sight with the satellite transmitting
the radio signal. Tunnels, bridges, covered parking, mountainous terrain, tall buildings,
heavy foliage, and other obstacles may momentarily interrupt the signal. This is normal
operation, and reception will be restored within a few seconds in an open, unobstructed
area. The signal can become weak in some areas that are not covered by the satellite
repeater network.
USB PORTS AND USE OF CABLES
The vehicle contains USB port(s) for playing music from a compatible media device as well as USB port(s) for charging.
Note: Devices will only be recharged when the vehicle is in ACC/ON/Start position. If you encounter difficulty plugging in a
USB device, change the orientation of the device (may be upside down). Always use the USB charging cable that has been
certified by the phone manufacturer. Use of aftermarket cables is
NOT
recommended as they may affect functionality.
AUTO HOLD*
Auto Hold temporarily maintains the vehicle at a standstill even if the brake pedal is
released. Auto Hold can be turned ON/OFF using the AUTO HOLD switch
A
located below
the Gear Shift. Before Auto Hold will operate, the driver’s door, engine hood, and trunk
must be closed, and the driver’s seat belt must be fastened.
The Auto Hold indicator has four states:
White:
Standby - With vehicle at a standstill, and AUTO HOLD switch
A
turned ON, the
indicator will illuminate white. While driving the vehicle (vehicle is not at a standstill),
the Auto Hold indicator will remain white.
Green:
Engaged - When coming to a complete stop by depressing the brake pedal, the
Auto Hold indicator changes from white to green.
OFF
(not illuminated) - The indicator will turn OFF when the AUTO HOLD switch
A
is
manually turned OFF or when the Electronic Parking Brake is manually turned ON.
Yellow:
Malfunction - When the indicator is illuminated yellow, there may be a system
malfunction. Take your vehicle to a local Kia dealer.
WIRELESS SMARTPHONE CHARGING SYSTEM
5
1. Enable Wireless Charging in the User Settings.
2. Slide open tray cover
A
.
3. Place compatible smartphone on the center of the charging pad
B
.
4. Indicator light
C
may change to amber once the wireless charging begins.
5. Once charging is complete, the amber light
C
may change to green.
SMART POWER LIFTGATE OPERATION*
To open the Smart Power Liftgate, press and hold the Smart Key Liftgate button until the
Liftgate begins opening. To close, push the power liftgate close button located inside
the liftgate lid, press and hold the Smart Key Liftgate button again, or push the button
on the dash panel to the left of the steering wheel.
When the Smart Key fob is on your person and you are in close proximity to and near the
back of the vehicle, the hazard lights will blink and a chime will sound for about 3 seconds
as an alert that the Smart Power Liftgate is about to open.
Then the alert system will blink and chime two additional times before opening the
Smart Power Liftgate.
The Smart Power Liftgate feature is OFF by default. To enable the Smart Power Liftgate,
go to User Settings in the LCD Instrument Cluster modes.
FRONT SEAT HEADREST ADJUSTMENT
6
To raise headrest: Pull headrest up.
To lower headrest: Press the lock button
A
, then press the headrest down.
HEAD-UP DISPLAY (HUD)*
7
The Head-Up Display (HUD) is a semi-transparent display that projects a snippet of
information from the instrument cluster and navigation system onto the windshield
glass. Drivers can turn the HUD display on or off in User Settings.
The HUD displays:
• Turn By Turn (TBT)
navigation information
8
• Road signs
• Speedometer
• Cruise setting speed
• Smart Cruise Control
(SCC) with Stop &
Go information*
8
• Blind Spot Collision Warning
(BCW) information*
8
• Warning lights (low fuel,
BCW)
• AV Mode information
Head-Up Display (HUD) Display Settings
Drivers can adjust the HUD settings from the LCD
Instrument Cluster modes in User Settings. HUD
settings include:
• Display Height: Adjust the height of the HUD
image on the windshield glass
• Rotation: Adjust the degree of HUD rotation
• Brightness: Adjust the intensity of the
HUD brightness
• Contents Select: Activate or deactivate HUD
content (TBT, SCC, LDW, BCW)
• Speedometer Size: Choose the size of the HUD
speedometer (Small, Medium, Large)
• Speedometer Color: Choose the color of the
HUD speedometer (White, Amber, Green)
Warning: Failure to pay attention to travel conditions and vehicle operation could result in
loss of vehicle control. Always drive safely and use caution.
P
R
N
D
OFF
OFF
P
A
(Button located below
Gear Shift)
12V
180W
AUX
USB
A
C
B
A
A