manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 77 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 77

Safety features of your vehicle

58

3

Front passenger's air bag warning
label for child restraint system

In addition, we recommend that you
do not place front-facing child
restraints in the front passenger’s
seat either. If the front passenger air
bag inflates, it could cause serious or
fatal injuries to the child.
If your vehicle is equipped with the
passenger’s front air bag ON/OFF
switch, you can activate or deactivate
the front passenger’s air bag when
necessary.
For more details, please refer to
"Passenger’s front air bag ON/OFF
switch" in this chapter. (if equipped)

WARNING 

• When the air bags deploy, the

air bag related parts in the
steering wheel, instrument
panel, front seats and/or in
both sides of the roof rails
above the front and rear doors
are very hot. To prevent injury,
do not touch the air bag stor-
age area’s internal compo-
nents immediately after an air
bag has inflated.

• Do not install or place any

accessories near air bag
deployment areas, such as
the instrument panel, win-
dows, pillars, and roof rails.

WARNING 

Never place a rear facing child
restraint in the front passenger
seat, unless the passenger-side
air bag is deactivated. An inflat-
ing passenger-side air bag
could impact the rear-facing
child restraint and kill the child.

OYDESA2042

OHM036053L

■ 

Type A

■ 

Type B

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments