manualshive.com logo in svg

Kia Stinger 2019, Owner'S Manual, Page: 70 / 671

Share
Download
Kia Stinger 2019 Owner'S Manual Download Page 70

3 51

Safety features of your vehicle

3. Remove as much slack from the

belt as possible by pushing down
on the Child Restraint System
whilst feeding the shoulder belt
back into the retractor.

4. Push and pull on the Child

Restraint System to confirm that
the seat belt is holding it firmly in
place.

If your Child Restraint System manu-
facturer recommends the use of a
top-tether with the lap/shoulder belt,
see page 3-47.

To remove the Child Restraint
System, press the release button on
the buckle and then pull the
lap/shoulder belt out of the Child
Restraint System and allow the seat
belt to retract fully.

OEN036104

Summary of Contents for Stinger 2019
































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments